My Philips Fan's base is wobbly or vibrating

Ensure that you place your Philips Fan on a flat surface and that no foreign objects are beneath the appliance.

Your Philips Tower fan must be correctly assembled before first-time use.

?

Turn the appliance off and unplug it from the wall socket. Follow the steps below for the correct base assembly:

1. Assemble the two pieces of the base part of the fan (see image 1).
2. Loosen and remove the cap from the bottom of the appliance (see image 2).
3. Put on the assembled base and tighten the cap back onto the appliance (see image 3).

Your Philips Pedestal Fan must be correctly assembled before first-time use.

Turn off the appliance and unplug it from the wall socket, then follow the steps below depending on the model:

CX2550 and CX3550:

1. Ensure that the upper and lower pillars are securely fastened to each other.
2. The whole pillar is fixed in the position.

ACP610, ACP62x,?CX1210, CX1220, CX1510 and?CX1520:

1. Ensure that the lower pillar and the base are securely assembled to each other, then fasten the base screw. The pillar height is adjustable; please fasten the knob on the pillar after adjusting.
2. Place the upper pillar (motor) onto the lower pillar, then turn the spinner on the upper pillar to fix the pillars to each other.

If your appliance is still unstable, please contact us for further assistance.

Your Philips Table Fan must be correctly assembled before first-time use. Turn off the appliance and unplug it from the wall socket, then follow the steps below depending on the model:

CX1030, CX104x:

1. Ensure that the motor part and the base are securely attached after assembly.
2. Ensure that you slide the power cable into the locking slot located under the base (indicated in below image). Otherwise, the fan may wobble or vibrate as it cannot sit properly on a flat surface.

If your appliance is still unstable, please contact us for further assistance.